Naaps

Lord Of The Rings Replica Swords

By Alexander Murryfield

The Lord Of The Ring movies, directed by Peter Jackson, shot mostly on location in his native New Zealand, have become instant classics, their critical and financial success making sword & sorcery movies acceptable again in Hollywood. The films dedication to practical authenticity when it came to swords and armour, coupled with Oscar winning production design, have created a range of replica weapons that should hold a place in any movie fans collection.

Alongside the release of the films themselves came a large selection of replica weapons and armour, officially licensed, from United Cutlery. What makes these items truly special is that they were made with the same care and attention that was lavished on the actual props, in many cases made using the same moulds!

Heading the line-up is the sword of the Kings of Gondor, Narsil, seen in the opening scenes of the first movie, cutting the all-important ring from Sauron’s finger. This is the broken blade that is re-forged by the elf lord Elrond in the final film, becoming Anduril, wielded by Aragorn in the third films climactic battle sequences. Replica’s are available of both versions, and are both magnificent, at over 50 inches long, with high quality stainless steel blades, antique silver and gold highlights and a leather wrapped grip. An equally impressive leather scabbard is available that fits either sword.

YouTube Preview Image

Also available are replica’s of the two important elvish swords worn by the fellowship; Glamdring, the sword wielded by Gandalf, and Sting, given by Bilbo Baggins to his nephew Frodo. In the movies these swords warned the adventurers of the presence of orcs by giving off a magical blue glow. Again, both blades are modelled from the actual movie props, with blades of high-quality stainless steel, with Glamdring possessing a leather wrapped grip. Leather scabbards are available separately for both weapons.

Many of the other heroes weapons featured on the films are also on available, including Aragorn’s original sword, the sword worn by Boromir, King Theoden and Eowyn’s swords and Arwen’s elvish blade. Again, the quality is uniforms excellent, with each sword sold with a presentation stand or wall plaque, and a certificate of authenticity.

The villains iconic weapons are not missed out either, with the terrible Ringwraith’s blades, and the brutish scimitars of the Uruk-Hai orcs also available, made in the same fashion and to the same quality as the hero’s blades, although, obviously not quite so pretty! Several of the blades use a complex acid etching technique to reproduce the worn and weathered look found on the actual film props. Finally, fans looking for something a little different can pick up a scaled down replica of the massive mace used by Sauron in the opening battle of the trilogy.

Finally, for those looking for the ultimate in quality, United Cutlery manufactured a small number of ‘Museum Quality’ replicas of Sting, Glamdring and Anduril. These were hand-forged from carbon-steel in Toledo Spain, and come with additional certificates of authenticity signed by none other than famed artist and production designer for the films, John Howe.

About the Author: Keep up to date with

film prop, replica weapons, and movie collectibles news and information

at our website.

Source:

www.isnare.com

Permanent Link:

http://www.isnare.com/?aid=307661&ca=Recreation


10 Ways To Save Money When Your Automobile Lease Ends

10 Ways to Save Money When Your Automobile Lease Ends

by

business writer-39701

Paying excess mileage charges when an auto lease ends is something most consumers take care to avoid. But many of these same careful lessees get an unhappy surprise at turn-in because of other charges and costs they failed to think about.

Carefully considering things such as best length of lease and residual value and then taking a few simple steps at the beginning of the lease and during the lease term can pay big dividends when the lease ends. The first thing is to read the lease document carefully and clearly understand the sections covering excess mileage, wear and tear, and processing fees.

Then consider what steps you can take to avoid charges when the auto is turned in. What you consider minor dings, dents or scratches can end up costing you a lot. When you lease a car, the sticker shock comes at the end, not the beginning, said Jack Gillis, a spokesman for the Consumer Federation of America and author of The Car Book, a buyer’s guide.

A Changing Market

Consumers love auto leasing because it offers an easy way to get into a new car with a lower down payment and lower monthly payments than financing a vehicle to be purchased. This is because the lessee is only paying for the amount of the car’s value that is used. Typically, people lease for three years, so they only pay for the first three years of a car’s life which are definitely the car’s best years.

Before tighter credit and lower residual values, car dealers also loved leasing because it brings customers back into the dealership at the end of the lease, every two or three years. Also, because many consumers are confused by leasing terms, dealers can more easily take advantage of them. Particularly in difficult economic conditions, leasing companies are looking for every way possible to improve their revenues.

Unfortunately, leasing which was once a way for car dealers, customers, and manufacturers to all get a decent deal is the latest victim of the economic downturn. Chrysler, Ford, BMW, GMAC and several major banks have announced reductions, if not complete elimination, of lease programs. Automobile dealers and experts expect more to follow. So a consumer who leased in the past should not assume the same rules apply today.

These changes and tighter credit conditions make it more difficult to lease and have caused leasing companies to be more stringent in their lease-end requirements. Lease contracts typically run 24 to 36 months, and consumers usually turn in their vehicles at the end of the term.

YouTube Preview Image

That leaves the auto maker on the hook to sell vehicles that may have declined significantly in value compared to assumptions made at the time the original lease was signed. And that means lessors are going over returned vehicles with a fine-tooth comb to get all the extra charges they can.

Major Problem Areas

Unexpected shocks and charges at turn-in are primarily associated with three areas of the lease, according to industry reports.

Disposition fee: This is a charge levied by the leasing company if the lessee chooses not to buy the vehicle at the end of the lease. This fee is set as compensation for the expenses of selling, or otherwise disposing of the vehicle. It typically includes administrative charges; the dealers cost to prepare the car for resale and any other penalties.

Lessees need to make sure this fee is stated clearly in the contract and is agreeable before signing on the dotted line. At lease-end, the lessee is left in no position to negotiate as the dealer can apply the refundable security deposit towards this fee.

Excess mileage charges: Almost all leasing companies will charge a premium for each mile over the agreed upon mileage stated in the contract. This penalty can be as high as 25 cents per mile and can add up quickly.

To avoid the risk of running thousands of dollars in excess mileage penalties at the end of the lease, always check the per mile charges in the contract and be realistic about mileage before signing any contract. If the limit is unrealistic given the lessees driving needs, then negotiate with the dealer to get a higher mileage contract.

Excess wear-and-tear charges: Another potential major cost at the end of the lease is any incidental damage done to the car during the lease. This is deemed any excessive damage done to the normal tear and wear of the vehicle. Notice the use of the terms deemed, excessive and normal. There is no standard formula to define whats excessive and normal and its up to the leasing company to assess or deem the damage and determine what they are going to charge.

This leaves the lessee at the mercy of unscrupulous leasing agents who set stringent tear-and-wear standards. Dings, dents, scratches and windshield chips are a major area of unexpected large charges. Lessees need to carefully read the description of these standards, understand them and agree to them. If the leased vehicle is damaged prior to the end of the lease, the lessee may find it cheaper to repair the damage than pay the excessive charges of the leasing agent.

How Do You Avoid Extra Charges at The End of The Lease?

Many consumers are anxious about leasing’s Judgment Day when the vehicle is returned to the dealer and its condition is inspected for extra charges. At the top of problem areas discussed above are excess wear-and-tear charges.

These fears are not unfounded, according to Tarry Shebesta, president of Automobile Consumer Services Corp., As the leasing market tightens up, banks are looking for a way to make money from returned cars. They will be more critical about wear and tear and any deviations from the lease contract.

Bottom line: Keep the car at a condition above and beyond average wear and tear to avoid penalties.

10 Ways to Save Money at Turn-In

Here are ten useful tips to keep in mind before and during the lease to prevent dings to your wallet as you say goodbye to your leased vehicle:

1. Choose a car with a naturally higher residual value. If the vehicle holds its value or surpasses its expected value there may be an option to buy it and make money at the end of the lease. This is particularly important in market conditions where the residual value of certain types of vehicles is dropping dramatically.

2. Don’t go into a lease longer than you would normally keep a car. If you keep a car about three years, do a three-year lease. A four- or five-year lease will be harder to get out of and more difficult to turn in without extra fees. Don’t lease longer than the warranty period that covers the car.

3. Purchase auto lease protection at the beginning of the lease. Cigarette burns or tears in the upholstery, certain dents, scratches, windshield chips and mechanical flaws can cause big charges if the leasing company considers them beyond normal wear and tear. Auto lease protection covers repair of dings, dents, scratches and stone chips that occur during the term of the lease.

4. Stay within the mileage limit. The best way to avoid having to pay for excess mileage is to take the time to estimate how much you will drive the car, including any weekend and holiday use, before you sign the lease. Then purchase extra miles up front. Typically, it is less expensive to do this than to pay extra mileage at the tail end of a lease. If you have really high mileage fees, consider selling the car yourself rather than paying the penalty.

5. Treat the car like it was your own. Elaine Littwer, legislative coordinator of the National Vehicle Leasing Association, says that its important for consumers to understand that damage reduces the resale value of a vehicle. The ‘I don’t own it and I don’t care’ attitude ends up costing them money.

6. Have the vehicle washed and detailed on a regular basis. Maintaining the vehicles appearance conveys that it has been well cared for.

7. Make sure the vehicle is serviced at the required intervals. Keep all maintenance records to provide proof of service and repairs.

8. Document the condition of the car. Research by Tom Incantalupo of Newsday recommends that, just before turning the car in, lessees take clear photos of the interior and exterior, including the odometer, for their own records should a dispute arise over mileage driven or whether specific damages are excessive – and also to protect themselves against damages that occur after the car was turned in.

9. Have the vehicle serviced just before you turn it in. This will ensure that it has no major problems and will provide a final third-party record of condition.

10. Any dents should be removed by a body shop rather than turning the car in with the damage. Repair charges covered by lease protection or paid privately are not subject to some of the expensive mark-ups charged by leasing companies.

Following these simple steps and Investing a little time and money during the course of your lease can ensure your peace of mind and protect your bank account when your leased cars Judgment Day arrives.

For more information, contact jsalter2@businesswriter.us

Jsmes Salter II is a professonal freelance business writer focusing on SEO and SEM white papers, articles, reports, brochures and web copy. His broad business management experience drives his writing focus on audience needs and business results. For more info contact him at jsalter2@businesswriter.us or visit his website at

www.businesswriter.us

.

Article Source:

10 Ways to Save Money When Your Automobile Lease Ends


Work In Winter Storms With Caution Ladder And General Winter Safety

Work in winter storms with caution ladder and general winter safety

by

Dave Cross

It is dangerous to work outside during stormy weather especially when ladders are involved. Winter storms expose workers to various hazards both during and after the event.

Hazards associated with winter storms, especially when working at height, can include dangers from falling objects, such as icicles, tree limbs and utility poles, driving accidents on slippery roadways and carbon monoxide poisoning.

Other winter storm related workers injuries include:

- Hypothermia or frostbite

- Back injuries while lifting or removing snow

- Slips and falls due to slippery walkways or ladders

- Electrocution from power lines and objects such as aluminium ladders that are in contact with power lines

- Burns from fires caused by energised lines and equipment failure

- Falls during snow removal on roofs, working platforms or ladders

- Roof collapsing under weight of snow

- Accidents due to improperly operated winter power tools

YouTube Preview Image

To avoid these disasters, it is important to ensure workers do the following:

- Stay well clear from downed or damaged power lines and use non

-aluminium ladders when working near electricity

.- Before cleaning and performing maintenance, check your power tools before connecting them to power sources.

- Use caution around surfaces weighed down by large amounts of snow or ice.

- Avoid injuries by scooping out small amounts of ice and snow at a time.

- Clear walking surfaces and ladders of snow and ice and use salt or its equivalent where appropriate.

- Use fall protection when working at height and with ladders.

- Whether working at height or on the ground, wear reflective clothing and protection for your eyes and face.

- Establish and clearly mark work zones, especially where ladders are involved.

- Carry out safe work practices to reduce the length and severity of exposure to the cold.

Working at height

Roofs

It is sometimes necessary to remove snow and ice build-up to prevent structural damage or collapse.

When using roof ladders, working platforms or standing on the roof itself, workers need to use fall protection systems, such as guardrails, barricades and other effective measures.

Fall protection is necessary on all roofs, including flat ones.

Ladder safety

When using portable roof ladders to remove ice and snow or to conduct repairs. When working with ladders, workers should:

- While on the ladder, use slip resistant footwear.

- All the rungs on the ladder must be completely free of oil, grease and ice

- While travelling up and down the ladder, face it, and hold on using both your hands.

- Keep at least one hand on the ladder at all times.

- If you are working around electricity, never use a metal/aluminium ladders.

- Roof ladders must be extended at least three or four feet above the roof itself.

- Tie down the ladder at the support point.

- Use ladder feet or another method to ensure the bottom of the ladder is non-slippery.

- Do not work from the top few rungs of a ladder.

- Do not overreach in either direction. This will unbalance the ladder.

- The correct slope of the ladder should be 4 (vertical) to 1 (horizontal).

For more information on ladder safety, roof

ladders

, aluminium ladders or working at height, visit http://www.brownsladders.co.uk.

Article Source:

ArticleRich.com